Cree XP-L2 EasyWhite LED
Nominal CCT 4000K
Typical CRI: 93-95
Tint Variation: within 2-step MacAdam Ellipse
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1 475 Lm (3min, then 352lm, total min) or H2 352 Lm ( hr) / 236 Lm ( hrs) / 144 Lm ( hrs)
Medium: M1 79 Lm ( hrs) or M2 40 Lm ( hrs) / 18 Lm ( hrs) / 7.4 Lm ( hrs)
Low: L1 2.8 Lm ( days) or L2 1.0 Lm ( days) / 0.28 Lm ( days) / 0.08 Lm ( months)
Beacon Strobe Mode: 4Hz Strobe at H1 / 19Hz Strobe at H1
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
不過要是又被報馬仔通報討拍.活動就沒了....
