SC53Fc AA Floody Neutral White High CRI FlashlightCree XP-L2 EasyWhite LED
Nominal CCT 4000K
Typical CRI: 93-95
Tint deviation: 2-step
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High: H1 276 Lm (0.9 hr) or H2 231 Lm (1.6 hr) / 166 Lm (2.3 hrs) / 103 Lm (4.2 hrs)
Medium: M1 54 Lm (8.5 hrs) or M2 25 Lm (21 hrs) / 10 Lm (41 hrs) / 3.4 Lm (4.5 days)
Low: L1 1.0 Lm (13 days) or L2 0.25 Lm (1.1 month) / 0.06 Lm (2.2 months) / 0.01 Lm (3.3 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
Operating Voltage Range: 0.7V - 2.0V
Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
Floody beam from frosted lens, with 90 degree beam spread
Dimensions
Head Diameter: 0.96 inch (23.6 mm)
Length: 3 inch (77.6 mm)
Weight
1.4 oz (40 gram)
圖片附件: sc53fvariant.jpg (2018-4-24 12:13, 16.81 KB) / 下載次數 265
