Board logo

標題: [已交換]Zebralight H600W一代 [打印本頁]

作者: a880149    時間: 2014-11-7 18:45     標題: [已交換]Zebralight H600W一代

本帖最後由 a880149 於 2014-11-14 10:11 編輯

收自波哥
八五成新
頭上有一小點磕痕





作者: fl007    時間: 2014-11-7 18:52

真的是好筒,推一個
小弟自己也有一把
作者: gison0215    時間: 2014-11-7 19:05

不好意思.好奇一下.請問一代是幾流明?有相關數據可參考嗎?謝謝~
作者: a880149    時間: 2014-11-7 19:11

3# gison0215

摘錄自波哥賣場

亮度和持續時間
高檔1: 420流明(54分鐘)前3分鐘 turbo達 750流明    高檔2: 170流明(7小時)/ 270流明(4小時)/ 420流明(2.4小時)/ 4Hz快閃
中檔1: 65流明  (18小時)中檔2: 21流明(50小時)
低檔1: 2.8流明 (280小時) 低檔2: 0.1流明(80天)

這個是H600一代的數據
H600W的亮度可能再低一些
作者: gison0215    時間: 2014-11-7 19:33

3# gison0215

摘錄自波哥賣場

亮度和持續時間
高檔1: 420流明(54分鐘)前3分鐘 turbo達 750流明    高檔2: 170流明(7小時)/ 270流明(4小時)/ 420流明(2.4小時)/ 4Hz快閃
中檔1: 65流明  (18小時 ...
a880149 發表於 2014-11-7 19:11
了解.謝謝前輩解惑...^^
作者: poaway    時間: 2014-11-7 19:42

這把成色似乎特別漂亮   
作者: a880149    時間: 2014-11-7 20:24

6# poaway


作者: zcc0949    時間: 2014-11-7 20:47

好物∼無奈銀彈不足
作者: GeenAKun    時間: 2014-11-7 20:58

好物∼無奈銀彈不足
zcc0949 發表於 2014-11-7 20:47
那是因為你剛收了一把SG6的關係吧
作者: takmatsumoto    時間: 2014-11-7 20:58

本帖最後由 takmatsumoto 於 2014-11-7 22:04 編輯

這隻可否用國際牌3400 18650。小痕跡是因為摔到嗎?
作者: takmatsumoto    時間: 2014-11-7 20:59

這隻可否用國際牌3400的18650
作者: a880149    時間: 2014-11-7 22:15

10# takmatsumoto

3400平頭可以使用
有痕跡是因為敲到
作者: a880149    時間: 2014-11-8 23:49

本帖最後由 a880149 於 2014-11-14 10:10 編輯

1# a880149

自降
作者: gitano    時間: 2014-11-10 21:19

本帖最後由 gitano 於 2014-11-10 21:20 編輯

H600w 一代規格資料,代貼一下(還是以原廠公佈為準嘍)

•LED: Cree XM-L Neutral White (Norminal CCT 4200K)

•User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High (H2) can be further configured to different brightness levels or strobes.

•Light Output
◦High:    H1 361Lm with 645Lm turbo in the first 3 min (2.3 hrs)  or   H2  146Lm (7 hrs) / 232Lm (4 hrs) / 361Lm (2.4 hrs) / 4Hz Strobe
◦Medium: M1  56Lm (18 hrs)     or    M2   18Lm (50 hrs)
◦Low:      L1   2.4Lm (280 hrs)   or    L2    0.09Lm (80 days)
Runtimes are tested using Panasonic NCR18650 (2900mAH) batteries. Light output are out the front (OTF) values. All levels are current regulated.
•Operating Voltage Range: 2.7V - 4.2V

•Battery: One 18650 size (up to 67mm long) 3.6/3.7V Li-ion rechargeable battery. Batteries are not included in the package.

• Parasitic Drain: Negligible (equivalent to 12 years)

•Beam Type
◦80 degree spill
◦12 degree hot spot
•Dimensions
◦Head Diameter: 0.95 inch (24.2 mm)
◦Length:  3.9 inch (99 mm)
•Weight
◦1.4 oz (39 gram)
•Features
◦Automatic stepping down from High to Medium, and from Medium to Low when the battery capacity is low
Builtin over-discharging protection with 2.7V cutoff
◦Electronic soft-touch switch
◦Smart user interface provides fast and easy access to all brightness levels
◦ Precision machined unibody casing from premium grade Alcoa aluminum bar stock
◦ Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to most of the surface area.
◦Durable natural hard anodized finish (Type III Class I)
◦Ultra clear lens with anti-reflection coatings on both sides
◦Orange peel textured reflector
◦Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
Waterproof to IPX8 (2 meters, 30 minutes)

作者: a880149    時間: 2014-11-12 09:00

1# a880149

保留中~
作者: a880149    時間: 2014-11-14 10:10

15# a880149


已交換




歡迎光臨 電筒王論壇 (https://news.wii.tw/~fogerdis/) Powered by Discuz! 7.0.0