kevingod1

斑馬的電路更開放了
Sc5c Mk2開始的新功能...

Multiple Mode Groups
This light comes with three mode groups, G5, G6 and G7. The G5, set as the factory default, can be selected with 5-click from OFF, while G6 and G7 can be selected with 6-click and 7-click from OFF respectively. Mode group selections are memorized after the light is turned off and through battery changes.
In all three mode groups
H can be either H1 or H2; M can be either M1 or M2; L can be either L1 or L2
from OFF: 1-click to H; 2-click to M; press and hold to cycle from L, M to H
In G5
H1 is fixed at 550Lm, H2 can be 407, 274, or 166Lm
M1 is fixed at 92Lm, M2 can be 46, 21, or 8.6Lm
L1 is fixed at 3.2Lm, L2 can be 1.1, 0.33 or 0.09Lm
In G6 and G7
H1, H2, M1, M2, L1 and L2 can be programmed to any of the 12 available brightness levels
Double-click 6 times at the H1, H2, ... L2 to enter the programming mode for that level. Once in the programming mode, use double-click to go up one level and triple-click to go down one level. Use 1-click to exit the programming mode
Three consecutive 5-click (or 6-click, 7-click) to reset the G5 (or G6, G7) back to the factory default settings

簡單來說,除了G5群組(Group 5)(為什麼用5..因為切換方式就是按5下)為原廠設定外,
G6跟G7群組(按6下跟按7下)可以在預設的12個亮度裡面,自定義哪個亮度要放哪個檔位..
以後...1下高亮. 2下中亮. 3下信標/爆閃. 4下電量檢測.
5下選擇原廠群組. 6下選擇自定義群組1. 7下選擇自定義群組2

2# wasiaso

預計出貨日是5月15..算是月中